VSI Automation TM20 Orbital Riveter with Allen Bradley Control System

Description

STORE
|
ABOUT US
|
CONTACT US
VSI Automation TM20 Orbital Riveter with Allen Bradley Control System
VSI Automation TM20 Orbital Riveter, Equipped with an Allen Bradley Control System, Panelview Operator Interface, and Two Hand Touch Safety Controls.  Very nice system with Heavy Duty Steel Table and Safety Fence.  The Allen Bradley control system will need to be reprogrammed for your application.  If you prefer not to use the Allen Bradley Control System, you can remove the automation and set this Orbital Riveter to operate "Stand-Alone".
Model: TM20
Type: Orbital Riveter
Horsepower: 1Hp
Voltage: 460Vac 3 Phase
Amperage: 1.7
RPM: 1140
Shipping
Payment
Returns
Shipping Polices
DOMESTIC SHIPPING
All Items Under 145 Lbs. will Ship Via USPS Priority Mail, UPS Ground, or UPS Next Day Air. We take pride in our work and go the extra mile to make sure your items are packaged properly to make it you, not only quickly, but in one piece.
Orders placed before 12:00 P.M. EST in most cases will be shipped the same day. (Unless special packaging or shipping arrangements are requested)
Next Day Air Orders need to be placed before 3:00 P.M. EST to ensure they will be processed in time. Please leave a note on your invoice if Early A.M. delivery is needed. Additional Charges will be applied for Early A.M. Delivery.
We do our best to meet our customers needs. If you need an item shipped after our 3:00 P.M. Deadline, please Contact Us with your request and we will do our best to accommodate your request.
If requested we can ship items using your UPS Account Number. Please leave a note on your invoice including your account number and Account Zip Code. We will remove and/or refund the shipping charge from your invoice.
Tracking Numbers will be Emailed to the address on your eBay account. Tracking Information can also be found on the Order Page in your eBay account.
Freight Shipping
All Items weighing over 145 Lbs will require Freight Shipping. We do ship LTL and Full Trailer Loads and can provide a Shipping Quote Prior to Purchase. Please provide the following information in order to get the most accurate rate:
Shipping Location Zip Code
State if the Shipping Location is a Commercial Address or Residential (additional shipping charges may apply for residential delivery)
State if a Liftgate will be Required for Unloading at the Destination (items over 3000 Lbs cannot be unloaded using a liftgate)
Once we receive this information a Shipping Quote will be provided within 24 hours during normal business hours
INTERNATIONAL SHIPPING
International Shipping is Available for all Items regardless of size.
Industrial Parts R Us Inc. can assist our International Customers with Customs forms and can Quote Heavy Equipment Shipping Rates for Overseas Delivery
Industrial Parts R Us Inc. accepts Paypal, MasterCard, Visa, AMEX, Company Checks, and Bank Wire Transfers.
For purchases over 00.00 Company Checks or Bank Wire Transfers are preferred.
Please contact us for for Bank Wire Instructions.
Company Checks can be made payable to "Industrial Parts R Us Inc."  and mailed to Industrial Parts R Us Inc. 1065 Bloomfield Rd. Suite D Bardstown KY 40004
Industrial Parts R Us Warranty Return Policy:
Industrial Parts R Us, Inc. parts are warranted for 30 days. All warranties are issued by Industrial Parts R Us, Inc. and not the manufacturer and will be honored by Industrial Parts R Us, Inc. If the unit is found defective within 30 days of the invoice date, return it for a free replacement or refund. (If you need to make a warranty return claim please contact us at
[email protected]
or call 800-380-4913 for a return authorization number (RMA#) prior to any return). All Surplus products sold by Industrial Parts R Us, Inc. are warranted to our customer only and as follows: such products shall be free from material defect (under normal use, storage, handling, installation and other normal conditions) for a period of 30 days from the date of sale. Our obligation shall be limited to the replacement or refund, at our choice, of any such defective product (or part thereof as we determine) free of charge to our customer; if we decide that the product cannot be replaced, we shall credit your account in an amount equal to the sum you paid us for it. Any warranty claim must be received before the end of the 30 day warranty period, together with return of the claimed defective product within this same period, and must include our return authorization number (RMA#). (If you need to make a warranty return claim please contact us at
[email protected]
or call 800- 380-4913 for a return authorization number (RMA#) prior to any return). THIS WARRANTY IS GIVEN IN LIEU OF ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THAT WE DISCLAIM ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR NON-INFRINGEMENT. IN NO EVENT SHALL WE BE LIABLE FOR ANY DAMAGES EXCEPT ACTUAL DAMAGES UP TO, BUT NOT EXCEEDING, THE AMOUNT PAID TO US FOR THE PRODUCT, INCLUDING WE SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INDIRECT DAMAGES OR LOST PROFITS WHETHER OR NOT ADVISED OF SAME. Industrial Parts R Us, Inc. is not a distributor sanctioned by the original manufacturer and we are not a party to any manufacturer’s warranty that may or may not apply.
Industrial Parts R Us Non-Warranty Return Policy:
If you are dissatisfied with a product from Industrial Parts R Us, Inc. you may return the product within 30 calendar days of the invoice date. A 15% restock administration fee will apply to all non-warranty returns. No non-warranty returns will be accepted 30 days after the invoice date. (If you need to make a non-warranty return claim please contact us at
[email protected]
or call 800-380-4913 for a return authorization number (RMA#) prior to any return). Our used surplus inventory may be an older series, style, weathered, or discolored. We do not accept returns of discounted surplus based on the date manufactured or the cosmetic condition of product or packaging. All Industrial Parts R Us, Inc. Used Items are repackaged in Industrial Parts R Us, Inc. custom shipping containers. Surplus may not come with manual(s) or other accessories normally supplied when buying factory new. Refunds will be issued only upon receipt and testing. Product must be returned in purchased condition and accompanied by a Industrial Parts R Us, Inc. return authorization number (RMA#). (If you need to make a non-warranty return claim please contact us at
[email protected]
or call 800-380-4913 for a return authorization number (RMA#) prior to any return).
We hope you will love your purchase, however if you need to return it, we have a 60 day return policy.
We hope you will love your purchase, however if you need to return it, we have a 60 day return policy.
We hope you will love your purchase, however if you need to return it, we have a 60 day return policy.
We hope you will love your purchase, however if you need to return it, we have a 60 day return policy.
We hope you will love your purchase, however if you need to return it, we have a 60 day return policy.
60" Wide x 186" Long Powered Roller Conveyor Pallet Conveyor 3/4Hp Chain Driven
,200.00
SMC CDQ2D32-40DCZ-XC35 Compact Cylinder 32mm Bore 40mm Stroke
.00
MiSUMi LHKIRNL25L Flange Type Linear Bushing, NEW
.99
Misumi LHFR30 Flange Type Linear Bushing A3-5-2 *0293*, NEW
.00
SMC CDQ2A50-50DM Compact Cylinder 50mm Bore 50mm Stroke
.00
Misumi SFJT30-150-M8 Pipe Bending Shaft, NEW
.99
Add suggested items to your listings -
Check it out on 3Dsellers.com
eBay listing template by
3D
sellers.com
-
Try for Free!