MSD 12V 15A 315mhz 12v or 0v output relay switch with 2 remote control key fobs

Description

RP100 multipurpose remote control switch with 2 wireless transmitter
This switch is a perfect gadget to perform open and close of your device remotely
There are two ways this switch can be setup for your prefer uses, (see diagram in photo section):
1. control your device with 12v output to also power your device when switch is closed.
2. or no voltage (dry contact 0v output) at all to your output device when it closed the contact for your device.
Great for any 12v dc project, home, automobile, motorcycle, boat, etc.
each set has its own unique code so no interference if two or more identical sets are operating nearby.
Specs:
Required a 12vdc power source with a minimum of 500mA of current for proper operation
Caution: do not connect directly to any AC outlet without an AC/DC adapter
Remote response range: ~80ft,
*transmitting/receiving range strength are depend on operating area, device setup, transmitter/receiver battery power strength etc...
Bandwidth: 315MHZ
Remote
mode: Latching, on/off, 2 buttons
Relay output contact rated: 12vdc@15Amp, 110~250VAC@15A.
Receiver Box Dimension: 1 7/8" x 1 7/8" x 1" (4.7cm x 4.7cm x 2.5cm)