Magnetic Stirrer Stir Plate with Stir Bar Capacity 1000ML Lab Equipment HJ-1S

Description

Description
Magnetic Stirrer Magnetic Stir Plate with Stir Bar Stirring Capacity 1000ML Lab Equipment HJ-1S
Specifications:
- Stirring Capacity: 1000 ml
- Speed: 0-2500 r/min
- Motor Power: 3W
- Maximum Length of Stir Bar: 30 mm
- Power Supply Voltage: 110V, 220V
- Overall Dimensions: 120 x 120 x 30 mm
- Work Plate Size: 85 x 85 mm
- Plate Material: Polyester film
- Weight: 0.3kg
Note: High speed can be only last about 5 minutes, no more than 10 minutes !!!!!!!!!!!!!!After the stirrer drives the liquid to stir, the speed can be adjusted to medium speed. If the motor runs at high speed for a long time, the circuit board and motor will be burned if the motor is too hot
Package Included:
- 1 x Magnetic Stirrer
- 1 x Magnetic Stir Bar
- 1 x Power Adapter
Using Instructions:
1. Place the magnetic stir bar in the solution that needs to be stirred in a container.
2. Place the container on the surface of the magnetic stirrer plate, make sure that the stir bar is located at the center of the bottom of the container.
3. Turn on the power, turn the knob to your desired speed, and confirm the stirring effect. After mixing is complete, turn off the knob.
Method of use:
Power socket should use two Kong Anquan socket,must be properly grounded. Please check whether the random parts and complete first, and then packed fixture, put the beaker on the center, join solution into the mixing.
According to the following steps:
1.Connect the power supply
2.Open the power switch
3.Adjust the speed control knob, from slow to fast to the desired speed , do not allow the top starter, lest stirring son was beating out of sync.
Matters needing attention:
1.This machine may suddenly out of control when using, should check whether there is external load short circuit or open circuit phenomenon.
2.The machine is in use, there may be errors, out of control will cause system failure, please install the external protection circuit (such as leakage protector, open, etc.).
3.The machine is at work, should be placed on a smooth solid work platform, never in inflammable and explosive and no noe work surface.
4.The machine is strictly prohibited in the inflammable and explosive gas, corrosive gas, vapor emissions.
5.The machine during the warranty period in the event of failure, please get professional maintenance staff, or contact the dealer, or call the factory for repair. To remove, the consequence is proud, this factory is not warranty.
6.This product is a common kind of instrument products, explosion-proof, not for human use, such as military, rescue working place.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.