Internet iPhone Android remote control system for Litetouch 5000LC FiveK CCU

Description

For sale is a computer programmed with your custom Litetouch system parameters to control your Litetouch system via the internet, wifi, cellular, or your home router.
A little history:
I built my home approximately 15 years ago.  At that time, the state-of-the-art Litetouch lighting system was installed.  I was able to control my system via an app on my iPhone, and could control the lights anywhere in the house, from anywhere with internet connectivity in the world.  Sadly, Litetouch corporation was purchased by Savant Systems, who decided to bury the project, and Litetouch was basically dead.  When IOS11 came out, it made my control program incompatible and obsolete, and I could no longer control my lighting.  I called my installer, who called Savant, who said they could help, for nearly ,000.  Yikes!
I figured there had to be something better, so over the course of a few months, I built my own system running on the openHab platform.  And I built it better than anything I had before.
Currently the system does the following:
Uses a web browser (Firefox strongly recommended) on a computer.
Uses a web browser on your iDevice or Android device.
Controls any keypad anywhere on the system, including switch presses, holds, and releases.
Display the LEDs of any keypad anywhere on the system.
Adjusts any load anywhere on the system, including adjusting individual dimmers.
Tally's all active loads in the system.  Also tally's active loads in areas and specific rooms.
Synchronizes the CCU clock on a daily basis so your timers don't lose time.
Now, I can make this system available to anyone else left out of the cold at a fraction of the price.
When you purchase this system, you will get the following:
A Raspberry Pi with case, power adapter, and serial port.
A serial cable to plug the system into your CCU.
An Ethernet cable to plug into your router.
Custom programming specific to your house and your Litetouch system.
In order to make the programming, you will need to send me a copy of your PRG file, which can be easily downloaded from your system.  I can walk you through this.  Once I receive your programming file, I will build the system, have it delivered, and walk you through installation.
Due to the fact that this is a custom built system dependent on the complexity of your PRG file, I cannot guarantee delivery until the system is built and tested.