Crestron DM-RMC-100-C DigitalMedia 8G+ Receiver Room Interface Controller

Description

Crestron DM-RMC-100-C DigitalMedia 8G+ Receiver Room Interface Controller
Ships Worldwide
(Customs, taxes and duties may apply)
Works perfect guaranteed. Includes all phoenix connectors.
The DM-RMC-100-C provides a simple one-box interface solution for a single display device as part of a complete Crestron®
DigitalMedia™
system. It functions as a DM 8G+™ receiver and control interface, providing a single HDMI® output along with Ethernet, RS-232, and IR control ports. In addition to DM 8G+, it is also compatible with HDBaseT®, allowing it to be connected directly to an HDBaseT certified source. Its compact, low-profile design allows the DM-RMC-100-C to be installed discreetly behind a flat panel display or above a ceiling mounted projector. It connects to the head end or source location using a single CAT type twisted pair cable.
[1]
DigitalMedia 8G+™
As the leader in HDMI and control system technologies, Crestron developed DigitalMedia (DM®) to deliver the first complete HD AV distribution system to take HDMI to a higher level. DigitalMedia allows virtually any mix of HDMI and other AV sources to be distributed throughout a home, office, school, or virtually any other facility. The latest generation of DM is called DigitalMedia 8G™ (DM 8G®). Engineered for ultra high-bandwidth and ultimate scalability, DM 8G provides a true one-wire lossless transport for moving high-definition video, audio, Ethernet, and control signals over a choice of low-cost twisted pair or fiber optic cable.
DM 8G over twisted pair copper wire is called DigitalMedia 8G+ (DM 8G+). DM 8G+ handles uncompressed Full HD 1080p video signals with support for 3D, Deep Color, and HDCP, as well as computer signals up to WUXGA. Audio capabilities include support for high-bitrate 7.1 audio formats like Dolby® TrueHD and DTS-HD Master Audio™ as well as uncompressed linear PCM. All signals are transported over a single CAT type cable, supporting distances up to 330 feet (100 m) using Crestron
DM 8G Cable
or CAT5e.
[1]
HDBaseT® Certified
Crestron DigitalMedia 8G+ technology is designed using HDBaseT Alliance specifications, ensuring interoperability with other HDBaseT certified products. Via its DM 8G+ input, the DM-RMC-100-C can be connected directly to an HDBaseT compliant source without requiring a DM transmitter. HDBaseT connectivity through the DM-RMC-100-C converges uncompressed full HD digital video, audio, Ethernet, power, and control signals through a single CAT5e or CAT6 cable.
[1]
Multimedia Display Interface
A single HDMI digital AV output port is provided on the DM-RMC-100-C for connection to a display or other device. The HDMI output can also handle DVI signals using an appropriate adapter or interface cable
[2]
.A single cable connects the DM-RMC-100-C to a DM switcher or transmitter, or to an HDBaseT source, transporting video, audio, control, networking, and power signals all through one simple RJ45 connection.
[1,3]
Multiple DM-RMC-100-Cs may be installed to handle each display in a multiroom distribution system, all fed from a central DM-MD series switcher. Or, a single DM-RMC-100-C can be fed straight from a DM 8G+ or HDBaseT transmitter, affording a simple solution for extending a computer or AV signal to a single display.
LAN Connectivity
Along with high-definition AV and control, DigitalMedia also integrates high-speed Ethernet networking for a total signal distribution solution. The DM-RMC-100-C includes a 10/100 Ethernet port, providing a convenient LAN connection for a local network device.
Embedded Device Control
The primary objective of every Crestron system is to enable precisely the control desired for a seamless user experience. The DM-RMC-100-C includes built-in RS-232, IR, and Ethernet control ports to allow programmable control of the display device connected to it. But, it can also provide an alternative to such conventional control methods by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to the control system, the DM-RMC-100-C provides a gateway for controlling the display device right through the HDMI connection, potentially eliminating the need for any dedicated control wires or IR emitters.
USB Signal Extension (optional)
DigitalMedia allows for the routing of USB signals alongside video and audio. USB signal extension is enabled on the DM-RMC-100-C by adding a
USB-EXT-DM
USB over Ethernet Extender Module
[4]
.
Low-Profile Installation
The DM-RMC-100-C mounts conveniently to a wall, ceiling, or other flat surface. At just one inch deep, it fits easily behind a flat panel display or above a ceiling-mounted projector. The unit can be powered using the wall mount power pack (included), or via PoDM (Power over DigitalMedia) for a true one-wire solution
[3]
. All connections and LED indicators are positioned on the sides, ensuring optimal access and visibility for a clean, serviceable installation. An array of indicators is provided for easy setup and troubleshooting.
Please refer to the DigitalMedia Resources Webpage at
http://www.crestron.com/dmresources/
for additional design tools and reference documents.
Key Features
DigitalMedia 8G+™ receiver and display controller
Connects to a DM® switcher or transmitter over a single CAT type twisted pair cable
[1]
Supports cable lengths up to 330 ft (100 m) using DM 8G® cable or CAT5e
[1]
HDBaseT® Certified — Enables direct connection to other HDBaseT certified equipment
Provides one HDMI® or DVI display output
[2]
Handles video resolutions up to Full HD 1080p
Handles computer resolutions up to WUXGA
Handles 3D video and Deep Color
Handles Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
HDCP compliant
Provides a 10/100 Ethernet LAN connection
Enables device control via CEC, IR, RS-232, and Ethernet
Compatible with USB-EXT-DM USB over Ethernet Extenders
[4]
Allows quick, easy setup and diagnostics
Low-profile surface mount design
Powered via the DM connection or local power pack (included)
[3]
PAYMENT INFO:
Payment is due immediately after the auction end. If you cannot pay immediately after the auction but want to bid please contact me and let me know when you will be able to send payment and I will let you know if you can bid.
If your feedback is less than 10, please contact me before bidding just to let me know that you are a real person and not someone that is going to bid and not pay. If you do not contact me before bidding, I will try to contact you and if you do not respond then I will cancel your bids and block your user id.
SHIPPING INFO
I will ship this out by the next day via FedEx or USPS after the payment is received. Your tracking number will be automatically sent to you when it goes out. I always pack well and insurance is always included!
INTERNATIONAL BUYERS
Please contact me for shipping quotes. You are responsible for all shipping, taxes and duties.
Thanks For Looking!!
Posted with
eBay Mobile