4.5” Bore x 24” Stroke Hydraulic Log Splitter Cylinder w/Detent Valve & Hose Kit

Description

4.5" Bore x 24" Stroke Hydraulic Log Splitter Cylinder With Detent-Style Valve and High Pressure Hose
Does your old hydraulic log splitter cylinder and leaky valve need to be replaced?  We have 4”, 4.5” and 5” diameter x 24” stroke, all-welded replacement double-acting cylinders in stock and ready to ship from our USA warehouse with a variety of valve combinations to fit your needs!
The valve on this cylinder combo has an adjustable detent, extending the life of your valve WAY past valve designs with fixed detents (What MOST OEM Splitter companies spec). As the detent wears over the years and begins to halt the return of the ram prematurely, you can adjust it, thereby rotating the detent surfaces past the worn areas and extending the life of the valve. (Check the photos to make sure your ports are the same, if they look like they mirror this valve, check out our combo with the C5 valve - same detent system, just the return and supply lines are on opposite sides!)
Our cylinders will replace your original worn-out double acting
TSC Husky, SplitMaster, Oregon, SpeeCo and many other
cylinders that have the double-ear mounting clevis as shown in our pictures without any modifications needed. Most of the time they are direct-fit.  All fit-up dimensions are listed in the picture section of this add.
4.5" Bore x 24" Stroke Hydraulic Cylinder Specifications
:
All welded design
Direct replacement for TSC Husky, SplitMaster, Oregon, SpeeCo and many others
USA seller
Double acting
Rebuildable (seals can be replaced)
1-3/4" Chrome rod with 9/16" mounting hole for wedge mounting
Double-ear mounting clevis design to accept 1-1/8"
24" stroke
4.5" diameter bore
1/2" NPT hydraulic ports
3500 maximum operating pressure
Painted black
1-1/8" Clevis mounting holes
Ships via UPS ground to the lower 48 states only!!!
The screw that is shown in the end of cylinder on rod side must be in place at all times during operation, do not remove this when you receive the cylinder!
Contact us for bulk and distributor pricing!!!!!!  We have pallets of these cylinders in stock ready to ship.
Log Splitter Valve, Adjustable Detent A7
Relief valve set at 3000 psi but is adjustable up to 3500 psi
Working ports ½”NPT (Cylinder Forward/Reverse)
In/Out ports ¾” NPT (Return and supply line to/from tank)
Detent Pressure set at 700 psi but is adjustable.
Compatible with most splitters (SpeeCo, MTD, Brave, Swisher etc)
Threaded
end cap for easy detent pressure adjustability
This is the next generation in log splitter valves. The detent is usually what wears out and causes valves to fail. This valve allows user to adjust the kick out pressure to what they need and as detent balls and grooves wear.
PAYMENT
·
We accept
PayPal
payment and
Credit Cards
.
·
We only ship to confirmed PayPal addresses or to the billing address on the credit card used to make your purchase.
·
If you need anything regarding payment, please feel free to contact us via eBay Message.
SHIPPING
·
Please note! We use FedEx or USPS for shipping.
We maintain the right to change carrier, without any notice to the buyer, so you receive your item(s) as fast as possible.
·
Your item will be dispatched within
1-2 business
days after your valued payment.
·
We currently only ship to the
48 continental states
and we do not provide international shipping.
Warranty
·
We Stand behind all of our products for
6 months
·
We will ship out
replacement
or
replacement parts
at our discretion.
RETURNS
·
If you are not satisfied with your purchase for any reason, you may return a product within
14 days
.
·
Buyers must pay the return shipping charge unless stated otherwise.
·
Return order must be in the same condition as received. If an item received was damage or defective, please notify seller within
5
days of receipt of item.
·
Prior to returning any order, please contact us via email for return address. All return orders should include your eBay user ID, eBay item number, and a brief reason for the return order.
ABOUT US
·
We strive to provide the best possible service to our customers. If you are satisfied with our product and service, please leave us a
5 STAR POSITIVE RATING
feedback as soon as you receive your order. That will help us to maintain good reputation on Ebay and it's
VITAL
for us.
·
If you are
DISSATISFIED
for any reason, please
DO
contact us via eBay message
BEFORE
leaving neutral, negative feedback or opening a case on eBay. We work hard to make sure you are satisfied and we will resolve any problem for you and will always leave positive feedback to all our customers.
CONTACT US
·
We can be reached by eBay message, please feel free to contact us about your questions, but please
DO NOT
open a dispute or give us bad feedback. We'll reply in
24 hours
during business days. Please give us one chance resolve the problem.
Thank you for looking and your valuable business.
Hours of Operation are Monday Through Friday 9 am to 5 pm MST